Horizontal Directional Drilling EquipmentPowering Every Direction
GOODRILL

Mud Pump System

Pump configuration — 135 mm stroke / 110 mm bore

The configuration below is separate from the 150 mm stroke configuration shown above.

Type Type Horizontal Rig Mud Pump
Stroke  (mm) 135
Cylinder Bore   (mm) 110
Flow (L/min) 800   550   370   260
Pressure  (MPa)  3.5    5     7.5   10
Rated Power  (KW) 55
Overall Dimension (mm) 3000*1260*1850
Weight (KG) 2420
Diesel Engine Model NO. QSB3.9-P110
Diesel Engine Power (KW) 79
Rated Speed (r/min) 1400

Product overview

Driven by diesel engine, using the speed gearbox instead of the traditional pulley drive, and wireless remote pneumatic control clutch. It is mainly used for matching use with about 90 tons of trenchless drilling rig, and can also be used for other aspects of grouting, mine sewage discharge and long-distance water supply and other purposes.

The pump has four kinds of flow and four kinds of pressure, flow and pressure change range, can be suitable for different aperture drilling and drag. The design, new structures, new materials and new technology, compact structure, light quality, small size, beautiful appearance, convenient installation and maintenance, high output pressure, long service life and stable performance.

Applications

Mud Recycling System

System specifications

# Item Model and Specification Remarks
1 Mud Feed Pump 11 kW Submersible Pump: The pump shell and impeller are made of alloy
2 Two Layers Shaker Screens Upper Screen 750 x 800
Bottom Screen 750 x 800		 Both Flat Shaker Screens and Wave Shaker Screens are Available
3 Electronic Control System Customized Electronic Control System Possess circuit protection (overload, undervoltage, high voltage and open-phase): with remote comtrol
4 Hydrocyclone 4 inches x 4 sets
5 Vibrating Motro 0.75 kW x 2 sets
6 Vibrating Mode Linear
7 Liquid Level Adjustment Mechanical Liquid Level Adjustment Full-automatic
8 Bottom Tank Backwash Butterfly-vavle Control Manual Operation
9 Recycling Capacity ≤60 m³/h When the slurry ratio is 1.2 g/cm3, and viscosity is 45s
10 Mixing Capacity  ≤25 m³/h
11 Cut Point ≥0.03mm (30 μ)
12 Power 21 kw
13 Slurry Feed Nozzle 3 inches
14 Weight 2650 kg
15 Dimension 3900 X 2100 X 2500 mm
16 Mixer Power 4 kW
17 Mud Mixing Tank 6 m3
18 Mud Recycling Buffer Tank 3 m3

Product overview

GOODDRILL Mixing and Recycling All-in-One Mud System is an integrated solution that combines mud mixing and mud recycling functions into a single, compact unit for HDD and trenchless construction projects. Designed to simplify on-site fluid management, the system provides efficient preparation, circulation, and recovery of drilling fluid while minimizing equipment footprint and setup time.

By integrating a high-shear mud mixing module with a multi-stage solids control system, the All-in-One Mud System enables continuous drilling fluid conditioning throughout the operation. Fresh drilling fluid can be rapidly prepared and blended, while used fluid is simultaneously cleaned, stabilized, and returned for reuse. This integrated workflow helps maintain consistent drilling fluid condition, improve cuttings transport, reduce waste disposal volume, and lower overall operating cost

With a modular, skid-mounted design, the system is easy to transport, quick to install, and well suited for small to medium HDD projects, urban job sites, and space-restricted environments. Built for reliability and ease of operation, the All-in-One Mud System offers contractors a practical, efficient, and environmentally responsible approach to complete drilling fluid management.

Applications

Mud Mixing System

System specifications

# Item Model and Specification Remarks
1 Mud Feed Pump 11 kW Submersible Pump: The pump shell and impeller are made of alloy
2 Two Layers Shaker Screens Upper Screen 750 x 800
Bottom Screen 750 x 800		 Both Flat Shaker Screens and Wave Shaker Screens are Available
3 Electronic Control System Customized Electronic Control System Possess circuit protection (overload, undervoltage, high voltage and open-phase): with remote comtrol
4 Hydrocyclone 4 inches x 4 sets
5 Vibrating Motro 0.75 kW x 2 sets
6 Vibrating Mode Linear
7 Liquid Level Adjustment Mechanical Liquid Level Adjustment Full-automatic
8 Bottom Tank Backwash Butterfly-vavle Control Manual Operation
9 Recycling Capacity ≤60 m³/h When the slurry ratio is 1.2 g/cm3, and viscosity is 45s
10 Mixing Capacity  ≤25 m³/h
11 Cut Point ≥0.03mm (30 μ)
12 Power 21 kw
13 Slurry Feed Nozzle 3 inches
14 Weight 2650 kg
15 Dimension 3900 X 2100 X 2500 mm
16 Mixer Power 4 kW
17 Mud Mixing Tank 6 m3
18 Mud Recycling Buffer Tank 3 m3

Product overview

GOODDRILL Mixing and Recycling All-in-One Mud System is an integrated solution that combines mud mixing and mud recycling functions into a single, compact unit for HDD and trenchless construction projects. Designed to simplify on-site fluid management, the system provides efficient preparation, circulation, and recovery of drilling fluid while minimizing equipment footprint and setup time.

By integrating a high-shear mud mixing module with a multi-stage solids control system, the All-in-One Mud System enables continuous drilling fluid conditioning throughout the operation. Fresh drilling fluid can be rapidly prepared and blended, while used fluid is simultaneously cleaned, stabilized, and returned for reuse. This integrated workflow helps maintain consistent drilling fluid condition, improve cuttings transport, reduce waste disposal volume, and lower overall operating cost

With a modular, skid-mounted design, the system is easy to transport, quick to install, and well suited for small to medium HDD projects, urban job sites, and space-restricted environments. Built for reliability and ease of operation, the All-in-One Mud System offers contractors a practical, efficient, and environmentally responsible approach to complete drilling fluid management.

Applications

WhatsApp