An HDD pullback swivel sits between the rotating tooling and the product pull head. Send suppliers the details of the whole assembly so they can quote a swivel that can be checked against the planned setup.
Identify the two ends separately
Label the reamer end and the pull head end on a sketch. For each end, record the connection type, mating component and any pin or thread designation you can confirm. Include a drawing or a photo with a scale. If an adapter is proposed, ask for its dimensions and identify who supplies the pin and retaining hardware.
Ask what the quoted rating means
Give the supplier the required load and the basis specified by the project team. Request documentation that identifies the exact swivel model and explains its working rating, conditions of use and any inspection requirements. Compare ratings on the same basis. A rig’s maximum pullback figure alone does not establish the load that the swivel and the other connections may safely carry.
Check the assembled envelope
Request the maximum outside diameter and assembled length, including adapters and any projecting hardware. Compare the drawing with the planned clearance and handling arrangement. Ask for a revised drawing if the supplier changes either connection or substitutes another model.
Keep the quote tied to the drawing
Ask for the quoted model, drawing revision, connection hardware, supplied documents and lead time on the same offer. List any unresolved dimension or rating as open before placing the order.
Discuss your drill rod requirements with GOODRILL.
Send an enquiry
